AM Industrial

Effective and efficient location of sondes and camera heads

1. Location mode
2. Signal display
   
3. Volume display
   
4. Battery display
   
5. Compass display
   
6. Frequency
   
7. Adjustable sensitivity
   
8. Frequency selection
   
9. Depth sonde / menu selection
   
10. On/Off switch
    
11. Sensitivity display
    
12. Signal display with stay-set indicator
    
13. Permanent depth measurement

Vivax vLocCam
The vLoc Cam is the simplest and best value-for-money method for locating and measuring the depth of sondes or camera heads.

Even unpracticed users can quickly and intuitively learn how to operate the entire location system. The “directional compass” in particular makes the locating of sondes and camera heads very quick and easy.

The large colour display, which can also be read in direct sunlight, provides the user with all the important information at a glance.

Its broad frequency spectrum (512 Hz, 640 Hz and 33 kHz) allows it to locate all conventionally used sondes and camera heads. After location of the sonde, the system can be used in passive mode (current and radio signal) at the located position to find cables or pipes in order to prevent damage to them while digging.

This makes the vLocCam a fast and reliable solution for your day-to-day locating tasks.

Benefits

• “Directional compass” for fast and precise locating of sondes or camera heads
• Depth measurement measured continuously or at the touch of a button
• Passive frequencies (current and radio signal) for avoiding cable damage when performing excavations
• Lightweight receiver (under 2.5 kg) makes for easier work
• Three active frequencies (512 Hz, 640 Hz, 33 kHz) for locating all conventional sondes and camera heads
• Large, sunlight-compatible LCD colour display  Automatic sensitivity control

Technical data
vLocCam Rx